Our comprehensive range of machine tools covers most manufacturing requirements, and even if it’s not a regular stock item,
we will import the correct machine to suit your needs.

WINHO Centre Lathes | S480 SERIES

Inverter Transmission Lathe

  • Power-saving, stable electric current and fine cutting trace.
  • A rotary switch controls spindle speed, this shortens the time for shifting gears.
  • Stepless speed change, any speed in the range can be chosen
  • Cutting depth reaches 8mm (1000rpm)

High Speed Precision Lathe

Selective bed width:
* S series: 300mm
* M series: 350mm
* L series: 400mm

Varied spindle bore diameters:
* S series: Ø58mm / Ø80mm(Optional)
* M series: Ø85mm/ Ø105mm(Optional)
* L series: Ø85mm / Ø120mm(Optional)

Contact Us

Office Hours
07:30 – 16:00

Tel : +27 11 845 2030
Tel : +27 11 845 2041
Cell : +27 83 298 9163
Email : info@craftmt.co.za

MODEL S480 Series
SPECIFICATIONS S1922, S1930, S1940, S1960, S1990
Swing over bed 470mm (18-1/2″)
Swing over cross slide 280mm (11″)
Center height 235mm (9-1/4″)
Center distance (mm) 560, 760, 1000,1500, 2200 (22″, 30″, 40″, 60″, 90″)
Swing over gap 690mm (27-1/8″)
Bed width 300mm (11-4/5″)
Spindle nose ASA D1-6/D1-8 (opt.)
Spindle bore 58mm (2-1/4″)/80mm (3″) (opt.)
Taper of spindle bore MT 6/MT 7 (opt.)
Spindle speed 20~2000rpm (12 steps)-spindle bore:58mm
40~2000mm (12 steps)-spindle bore:80mm
Inch Threads range 4~56 TPI
Metric threads range P0.5~P7
Longitudinal feeds range 0.05~0.82mm (0.002~0.032″)
Cross feeds range 0.02~0.4mm (0.001~0.0094″)
Leadsrew Diameter 35mm (1-1/3″)
Leadscrew Pitch 4 TPI or 6 mm
Taper of tail center MT 4
Tail spindle travel 150mm (5-7/8″)
Tail spindle diameter 68mm (2-2/3″)
Main drive motor 7.5HP (5.625kW)/10HP (7.5kW) (opt.)
Coolant pump 1/8HP (0.1kW)
Compound rest travel 125mm (4-7/8″)
Cross slide travel 245mm (9-2/3″)
  1. With FAG or SKF precision bearings installed on spindle, maximum
    cutting depth can be 8mm on 50mm diameter and best roundness
    reaching 0.003mm (200mm long).
  2. Equipped with plastic rear gears, shafts and gears inside headstock
    are well protected if crash should occur. (Opt. S430 & S480 Series)
  3. Thermal treated and precision ground alloy gears.
  4. Universal gearbox for both imperial and metric threading.
  5. Tracks of cross slide and bed are well lubricated with lubrication pump.
  6. Overload device to ensure safely when operating.
  7. Wear-resistant phosphor bronze lead screw nuts
  8. Durable reservoir oil bath type cross slide. (for S series)
  9. Thermal treated Meehanite casting bed, hardness of bed reaching HS70.
  10. One-piece base with high rigidity and low vibration.
  11. High-capacity coolant tank offers sufficient coolant output.